Gemalto CINTERION BGS2T - 12.9 AT+FDCC Query or set capabilities

BGS2T AT Command Set
12.9 AT+FDCC
BGS2T_ATC_V01.301 Page 349 of 554 1/31/12
c
12.9 AT+FDCC Query or set capabilities
This command allows the connected application to sense and constrain the capabilities of the facsimile DCE
(=ME), from the choices defined in CCITT T.30 Table 2.
Syntax
Notes
• For further information see AT+FDIS.
• Used for Fax Class 2 only.
Test Command
AT+FDCC=?
Response(s)
(list of <vr>s), (list of <br>s), (list of <wd>s), (list of <ln>s), (list of <df>s), (list of <ec>s), (list of <bf>s),
(list of <st>s)
OK
Read Command
AT+FDCC?
Response(s)
<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
OK
Write Command
AT+FDCC=<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
- + + - - - - EIA PN-2388
Confidential / Released