Gemalto CINTERION BGS2T - 13.22 AT^SSCONF SMS Command Configuration

BGS2T AT Command Set
13.22 AT^SSCONF
BGS2T_ATC_V01.301 Page 403 of 554 1/31/12
c
13.22 AT^SSCONF SMS Command Configuration
AT^SSCONF controls the presentation of the SMS parameters <ra> and <tora>. <ra> and <tora> are indi-
cated within the result codes of AT+CMGL, AT^SMGL, AT+CMGR, AT^SMGR and the URC "+CDS".
Syntax
Parameter Description
Display recipient address
0
(&F)(P)
BGS2T does not display <ra> and <tora>.
1 BGS2T displays <ra> and <tora>.
Test Command
AT^SSCONF=?
Response(s)
^SSCONF:(list of supported <mode>s)
OK
Read Command
AT^SSCONF?
Response(s)
^SSCONF:<mode>
OK
Write Command
AT^SSCONF=<mode>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3  Last
- + + + + - -
<mode>
(num)
Confidential / Released