BGS2T AT Command Set
15.20 AT^SSTGI
BGS2T_ATC_V01.301 Page 452 of 554 1/31/12
c
15.20 AT^SSTGI SAT Get Information - Set up Menu (37)
This command shall be used after receiving the URC ^SSTN: 37. The response provides the main menu of the
SIM Application to the TE. It needs to be stored by the TE so that it can be displayed without invoking a proactive
session.
As with every proactive command the TE is expected to acknowledge the ^SSTGI response with AT^SSTR to
confirm that the proactive command has been executed.
Terminal Response via AT^SSTR will not provide any user information in case of this proactive command. Refer
to AT^SSTR.
AT^SSTGI can be issued during states IDLE, PAC and WAIT for this proactive command without previously
receiving a URC ^SSTN:<cmdType>, see AT^SSTGI.
Syntax
Parameter Description
37 Proactive command ID, see Remote-SAT Command Types
0...255 Used as bit field
bit 1 0: No selection preference
1: Selection using soft key preferred
bit 2-7 RFU
bit 8 0: No help information available
1: Help information available
Number of menu items in the list
String displaying menu title
Write Command
AT^SSTGI=37
Response(s)
The first line of output from the ME is:
^SSTGI: <cmdType>, <commandDetails>, <numOfItems>, <titleText>,
<menuItemIconsPresent>, <menuItemIconsQualifier>, <titleIconQualifier>,
<titleIconId>
One line follows for every item, repeated for <numOfItems>:
^SSTGI: <cmdType>, <itemId>, <itemText>, <nextActionId>, <iconId>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last
- + + + + - -
<cmdType>
(num)
<commandDetails>
(num)
<numOfItems>
(num)
<titleText>
(str)
To Next Page
Loading...
Need help?
General
