BGS2T AT Command Set
11.10 AT+CGPADDR
BGS2T_ATC_V01.301 Page 318 of 554 1/31/12
c
11.10 AT+CGPADDR Show PDP address
Syntax
Command Description
The test command returns a list of defined <cid>s.
The write command returns a list of PDP addresses for the specified context identifiers. If no <cid> is specified,
the addresses for all defined contexts are returned.
Parameter Description
A numeric parameter which specifies a particular PDP context definition (see AT+CGDCONT command).
A string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic.
Note
• If no <cid> is specified, the write command will return a list of all defined contexts.
Test Command
AT+CGPADDR=?
Response(s)
[+CGPADDR: (list of defined <cid>s)]
OK
Write Command
AT+CGPADDR=[<cid>[,<cid>]]
Response(s)
[+CGPADDR: <cid>, <PDP_address>]
[+CGPADDR: <cid>, <PDP_address>]
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
+ + + + + - - 3GPP TS 27.007 [35]
<cid>
(num)
<PDP_address>
(str)
To Next Page
Loading...
Need help?
General
