BGS2T AT Command Set
15.32 AT^SSTR
BGS2T_ATC_V01.301 Page 466 of 554 1/31/12
c
15.32 AT^SSTR SAT Response - Play Tone (32)
The TE is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Com-
mand has been executed.
Syntax
Parameter Description
0...255
0 Command performed successfully. Indicate that the user has accepted the call
request.
4 Command performed successfully, but requested icon could not be displayed.
16 Proactive SIM session was terminated by user.
32 ME or TE currently unable to process command.
48 Command beyond ME's (respectively TE's) capabilities.
132 TE currently unable to process command because screen is busy.
Optional additional command status; for possible values refer to 3GPP TS 11.14 [15].
0...255
Note
• It is possible for the TE to stop playing the tone by sending the AT^SSTR before Tone is finished.
Write Command
AT^SSTR=32, <status>, , [, <statAddInfo>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3 Last
- + + + + - -
<status>
(num)
<statAddInfo>
(num)
To Next Page
Loading...
Need help?
General
