Gemalto CINTERION BGS2T - 2.4 ATQ Result Code Presentation Mode

BGS2T AT Command Set
2.4 ATQ
BGS2T_ATC_V01.301 Page 38 of 554 1/31/12
c
2.4 ATQ Result Code Presentation Mode
ATQ controls if the BGS2T transmits any result code to the TE. Other information text transmitted as response is
not affected.
Syntax
Parameter Description
Result Code Presentation Mode.
It is not recommended to change this value.
[0]
(&F)(D)
ME transmits result code.
1 Result codes are suppressed and not transmitted.
Exec Command
ATQ[<n>]
Response(s)
If <n>=0:
OK
If <n>=1:
(none)
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
- + + + + - - V.250
<n>
(num)(&W)(&V)
Confidential / Released