EasyManua.ls Logo

Gemalto CINTERION BGS2T - Proprietary Release Cause for L3 Call Control (CC)

Gemalto CINTERION BGS2T
554 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BGS2T AT Command Set
3.4 AT+CEER
BGS2T_ATC_V01.301 Page 82 of 554 1/31/12
c
All other values in the range 0 to 31 shall be treated as cause 31.
All other values in the range 32 to 47 shall be treated as cause 47.
All other values in the range 48 to 63 shall be treated as cause 63.
All other values in the range 64 to 79 shall be treated as cause 79.
All other values in the range 80 to 95 shall be treated as cause 95.
All other values in the range 96 to 111 shall be treated as cause 111.
All other values in the range 112 to 127 shall be treated as cause 127.
3.4.8 Proprietary release cause for L3 Call Control (CC)
63 service or option not available, unspecified
Service or option not implemented (all other values in the range 64 to 79 shall be treated as cause 79)
65 bearer service not implemented
68 ACM equal or greater than ACM max
69 requested facility not implemented
70 only restricted digital information bearer capability is available
79 service or option not implemented, unspecified
Invalid message (e.g. parameter out of range) class (all other values in the range 80 to 95 shall be treated as
cause 95)
81 invalid transaction identifier value
87 user not member of CUG
88 incompatible destination
91 invalid transit network selection
95 semantically incorrect message
Protocol error (e.g. unknown message) class (all other values in the range 96 to 111 shall be treated as cause
111)
96 invalid mandatory information
97 message type non-existant or not implemented
98 message type not comaptible with protocol state
99 information element non-existent or not implemented
100 conditional information element error
101 message not compatible with protocol
102 recovery on timer expiry
111 protocol error, unspecified
Interworking class (all other values in the range 112 to 127 shall be treated as cause 127)
127 interworking, unspecified
Number Description
1 call dropped
2 service not available
3 hold procedure not available
4 temporary no service, previous procedure not yet finished
5 no speech service available
6 call reestablishment procedure active
Number Description
Confidential / Released

Table of Contents

Related product manuals