BGS2T AT Command Set
15.3 Remote-SAT Command Types
BGS2T_ATC_V01.301 Page 425 of 554 1/31/12
c
15.3 Remote-SAT Command Types
The Command Type value (cmdType) identifies the type of command or associated response passed between
the TE and the ME.
cmdType is the parameter that comes first in AT commands, in responses to AT^SSTGI and AT^SSTR com-
mands, and in the "^SSTN" URC. Also, the cmdType values may be used as Next Action Indicator for the SETUP
MENU and for SELECT ITEM.
SAT implementation supports SAT class 3 (as specified by 3GPP TS 11.14 [15] Release 99, letter class "c").
Table 15.6: Command Type Table
Proactive Toolkit commands vs. Terminal Responses
Proactive Toolkit com-
mand (AT^SSTR=<cmd-
Type>)
Terminal Response in
Automatic Response
Mode (see AT^SSTA=0)
Terminal Response user
choices in Explicit
Response Mode (see
AT^SSTR=<cmd-
Type>,<status>)
Terminal Response after
user timeout in Explicit
Response Mode (see
URC ^SSTN: <cmdTer-
minateValue>)
REFRESH (1) 0 0 0
SET UP EVENT LIST (5) 0 0, 32, 48, 132 132
SET UP CALL (16) 48 0, 4, 16, 20, 32, 34, 35, 48,
132
132
SEND SS (17) 48 0, 4, 20, 32, 48, 132 132
SEND USSD (18) 48 0, 4, 20, 32, 48, 132 132
SEND SHORT MES-
SAGE (19)
48 0, 4, 32, 48, 132 132
SEND DTMF (20) 48 0, 4, 16, 32, 48, 132 132
LAUNCH BROWSER
(21)
48 0, 4, 32, 34, 38, 48, 132,
138, 238, 239
132
PLAY TONE (32) 48 0, 4, 16, 32, 48, 132 132
DISPLAY TEXT (33) 0 0, 4, 16, 17, 18, 32, 48,
132
132
GET INKEY (34) 48 0, 4, 16, 17, 18, 19, 32, 48,
132
18
GET INPUT (35) 48 0, 4, 16, 17, 18, 19, 32, 48,
132
18
SELECT ITEM (36) 48 0, 4, 16, 17, 18, 19, 32, 48,
132
18
SET UP MENU (37) 0 0, 4, 32, 48, 132 132
SET UP IDLE MODE
TEXT (40)
0 0, 4, 32, 48, 132 132
LANGUAGE NOTIFICA-
TION (53)
0 0 0
To Next Page
Loading...
Need help?
General
