BGS2T AT Command Set
5.5 AT^SLCK
BGS2T_ATC_V01.301 Page 125 of 554 1/31/12
c
5.5 AT^SLCK Facility lock
AT^SLCK provides the "Facility lock" function as defined for the 3GPP TS 27.007 [35] command AT+CLCK. The
command can be used to lock, unlock or interrogate a network or ME <facility>.
AT^SLCK is, in every respect, identical with AT+CLCK, except that the command syntax and response prefix is
"^SLCK" instead of "+CLCK". For further details please refer to AT+CLCK.
The command can be aborted when network facilities are being set or interrogated.
Syntax
Test Command
AT^SLCK=?
Response(s)
^SLCK:list of supported <facility>s
OK
Write Command
AT^SLCK=<facility>, <mode>[, <password>][, <class>]
Response(s)
if <mode> is not equal 2 and command successful:
OK
if <mode>= 2 and command successful:
^SLCK: <status>, <class>
[^SLCK: <status>, <class>]
[^SLCK: ...]
OK
If error is related to ME functionality
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
± + + + + - - 3GPP TS 27.007 [35],
3GPP TS 22.004 [17],
3GPP TS 22.088 [25],
3GPP TS 23.088,
3GPP TS 24.088
To Next Page
Loading...
