Gemalto CINTERION BGS2T - 9.6 AT+CCFC Call forwarding number and conditions control

BGS2T AT Command Set
9.6 AT+CCFC
BGS2T_ATC_V01.301 Page 218 of 554 1/31/12
c
9.6 AT+CCFC Call forwarding number and conditions control
AT+CCFC controls the call forwarding supplementary service. Registration, erasure, activation, deactivation and
status query are supported.
Syntax
Parameter Description
Reason for call forwarding
0 Unconditional
1 Mobile busy
2 No reply
3 Not reachable
4 All call forwarding (includes reasons 0, 1, 2 and 3)
5 all conditional call forwarding (includes reasons 1, 2 and 3)
Network operation to be performed for Supplementary service "call forwarding"
0 Disable call forwarding (disable service)
1 Enable call forwarding (enable service)
2 Query status of call forwarding (query service status)
Test Command
AT+CCFC=?
Response(s)
+CCFC:(list/range of supported <reason>s)
OK
Write Command
AT+CCFC=<reason>, <mode>[, <number>[, <type>[, <class>[, <time>]]]]
Response(s)
If <mode> is not equal 2 and command successful:
OK
If <mode>= 2, <reason> is not equal 2 and command successful:
+CCFC: <status>, <class>[, <number>, <type>]
OK
If <mode>= 2, <reason>= 2 and command successful:
+CCFC: <status>, <class>[, <number>, <type>, <time>]
OK
If error is related to ME functionality
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
+ + + + + - - 3GPP TS 27.007 [35],
3GPP TS 22.004 [17],
3GPP TS 22.082 [22],
3GPP TS 24.082
<reason>
(num)
<mode>
(num)
Confidential / Released