BGS2T AT Command Set
15.36 AT^SSTR
BGS2T_ATC_V01.301 Page 472 of 554 1/31/12
c
15.36 AT^SSTR SAT Response - Select Item (36)
The TE is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Com-
mand has been executed. The TE sends a response that can indicate the user's intentions, e.g. when the user
is requesting help or selecting a menu item.
For compatibility reasons <itemId> is optional in case of <status>=19 ("Help information required by the
user"). In this case <itemId>=0 is sent to the SIM.
Syntax
Parameter Description
0...255
0 Command performed successfully. Indicate that the user has accepted the call
request.
4 Command performed successfully, but requested icon could not be displayed.
16 Proactive SIM session terminated by user
17 Backward move in the proactive SIM session requested by the user
18 No response from user
19 Help information required by the user
32 ME currently unable to process command
48 Command beyond ME's capabilities
132 ME currently unable to process command because screen is busy
Item IDs are supplied by the SIM Application
1...255 ID of selected item can be issued if a <status> value of 0 is returned
Optional additional command status; for possible values refer to 3GPP TS 11.14 [15].
0...255
Write Command
AT^SSTR=36, <status>, <itemId>[, <statAddInfo>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3 Last
- + + + + - -
<status>
(num)
<itemId>
(num)
<statAddInfo>
(num)
To Next Page
Loading...
Need help?
General
