BGS2T AT Command Set
16.5 AT^SPBC
BGS2T_ATC_V01.301 Page 494 of 554 1/31/12
c
16.5 AT^SPBC Find first matching entry in sorted phonebook
The AT^SPBC write command searches the current phonebook for the index number of the first (lowest) entry
that matches the character specified with <schar>. The AT^SPBC test command returns the list of phonebooks
which can be searched through with AT^SPBC.
CAUTION: Please note that AT^SPBC is assigned the same index as AT^SPBG or AT^SPBS which is not identical
with the physical location numbers used in the various phonebooks. Therefore, do not use the index numbers
retrieved with AT^SPBC to dial out or modify phonebook entries.
Syntax
Parameter Description
Response parameter of AT^SPBC test command.
For a detailed description of storages see AT+CPBS.
“FD“ Fixed dialing phonebook
“SM“ SIM phonebook
“ME“ Mobile Equipment Phonebook
First character of the entry to be searched in the sorted list of phonebook entries.
In the active phonebook, the first (lowest) index number of an entry beginning with <schar>. As stated above,
the retrieved index number shall not be used to dial out or edit phonebook entries. If no matching phonebook
entry is found, <index>=0 will be returned.
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 19.1, Restricted access to SIM data after SIM PIN authentication for further detail.
Test Command
AT^SPBC=?
Response(s)
^SPBC: (list of supported <storage>s)
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SPBC=<schar>
Response(s)
^spbc: <index>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last
+ + + + + - -
<storage>
(str)
<schar>
(str)(+CSCS)
<index>
(num)
To Next Page
Loading...
Need help?
General
