Gemalto CINTERION BGS2T - 7.28 AT^STCD Display Total Call Duration

BGS2T AT Command Set
7.28 AT^STCD
BGS2T_ATC_V01.301 Page 173 of 554 1/31/12
c
7.28 AT^STCD Display Total Call Duration
Syntax
Command Description
TA returns total call duration (accumulated duration of all calls).
Parameter Description
Format is "hh:mm:ss", where characters indicate hours, minutes, seconds; E.g. 22:10:00 "22:10:00"
Max value is 9999:59:59
Notes
• The Total Call Duration will not be reset by power off or other means.
• The proper working of that command is network dependant and only for MO calls.
Test Command
AT^STCD=?
Response(s)
OK
ERROR
+CME ERROR: <err>
Exec Command
AT^STCD
Response(s)
^STCD: <time>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last
+ + + + + - -
<time>
(str)
Confidential / Released