BGS2T AT Command Set
15.15 AT^SSTGI
BGS2T_ATC_V01.301 Page 442 of 554 1/31/12
c
15.15 AT^SSTGI SAT Get Information - Play Tone (32)
This command shall be used after receiving the URC ^SSTN: 32.
The ME has been instructed to generate an audible tone, and may pass to the TE some information to support
this.
Syntax
Parameter Description
32 Proactive command ID, see Remote-SAT Command Types
This byte is RFU.
String to accompany tone
Tone generated by the ME
01...08 Standard supervisory tones:
“01“ Dial tone
“02“ Called subscriber busy
“03“ Congestion
“04“ Radio path acknowledge
“05“ Radio path not available / Call dropped
“06“ Error / Special information
“07“ Call waiting tone
“08“ Ringing tone
16...18 ME proprietary tones:
“16“ General beep
“17“ Positive acknowledgement tone
“18“ Negative acknowledgement or error tone
Write Command
AT^SSTGI=32
Response(s)
^SSTGI: <cmdType>, <commandDetails>, <infoText>, <tone>, <durationUnit>, <duration>,
<iconQualifier>, <iconId>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last
- + + + + - -
<cmdType>
(num)
<commandDetails>
(num)
<infoText>
(str)
<tone>
(str)
To Next Page
Loading...
