BGS2T AT Command Set
12.10 AT+FDFFC
BGS2T_ATC_V01.301 Page 350 of 554 1/31/12
c
12.10 AT+FDFFC Data Compression Format Conversion
This command determines the ME response to a mismatch between the data format negotiated for the fax ses-
sion, reported by the <df> subparameter, and the Phase C data desired by the controlling application, indicated
by the optional AT+FDT <df> subparameter, or the AT+FDIS <df> subparameter for AT+FDR operation.
Syntax
Parameter Description
[0] Mismatch checking is always disabled. The controlling application has to check
the <df> subparameter and transfer matching data.
Notes
• For further information see AT+FDIS.
• Used for Fax Class 2 only.
Test Command
AT+FDFFC=?
Response(s)
(list of <df>s)
OK
Read Command
AT+FDFFC?
Response(s)
<df>
OK
Write Command
AT+FDFFC=<df>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
- + + - - - - EIA PN-2388
<df>
(num)
To Next Page
Loading...
