Gemalto CINTERION BGS2T - 8.17 AT^SPLW Write an entry to the preferred operators list

BGS2T AT Command Set
8.17 AT^SPLW
BGS2T_ATC_V01.301 Page 206 of 554 1/31/12
c
8.17 AT^SPLW Write an entry to the preferred operators list
The AT^SPLW write command writes an entry to the SIM list of preferred operators at location number <index>.
If <index> is given but <oper> is left out, the entry is deleted. An operator can be only once in the list. Test
command returns the whole index range supported by the SIM.
See also 3GPP TS 27.007 [35]: AT+CPOL
Syntax
Parameter Description
location number
Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code
plus a 2- or 3-digit network code).
Test Command
AT^SPLW=?
Response(s)
^SPLW:(list of supported <index>s)
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SPLW=<index>[, <oper>]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last
+ + + + + - -
<index>
(num)
<oper>
(str)
Confidential / Released