Gemalto CINTERION BGS2T - 18.3 ATS4 Response Formatting

BGS2T AT Command Set
18.3 ATS4
BGS2T_ATC_V01.301 Page 517 of 554 1/31/12
c
18.3 ATS4 Response Formatting
ATS4 determines the character generated by the BGS2T for result code and information text, along with the com-
mand line termination character set via ATS3.
Syntax
Parameter Description
Response formatting character.
It is not recommended to change this value.
000...10
(&F)
...127
Note
• If changing this setting the new value has no effect for "^SHUTDOWN" URC.
Read Command
ATS4?
Response(s)
<n>
OK
Write Command
ATS4=<n>
Response(s)
OK
ERROR
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
- + + + + - - V.250
<n>
(num)(&W)(&V)
Confidential / Released