Gemalto CINTERION BGS2T User Manual

BGS2T AT Command Set
9.13 AT+CSSN
BGS2T_ATC_V01.301 Page 235 of 554 1/31/12
c
9.13 AT+CSSN Supplementary service notifications
AT+CPUC enables or disables the presentation of URCs for supplementary services.
Syntax
Unsolicited Result Codes
URC 1
+CSSI: <code 1>
When <n>=1 and a supplementary service notification is received after a mobile originated call setup, inter-
mediate result code "+CSSI: <code 1>" is sent to TE before any other MO call setup result codes
URC 2
+CSSU: <code 2>
When <m>=1 and a supplementary service notification is received during a mobile terminated call setup or
during a call, unsolicited result code "+CSSU: <code 2>" is sent to TE.
Parameter Description
0
(&F)(P)
Suppress "+CSSI" URCs
1 Activate "+CSSI" URCs
0
(&F)(P)
Suppress "+CSSU" URCs
1 Activate "+CSSU" URCs
0 Unconditional call forwarding is active
Test Command
AT+CSSN=?
Response(s)
+CSSN: (list of supported<n>s), (list of supported<m>s)
OK
Read Command
AT+CSSN?
Response(s)
+CSSN: <n>, <m>
OK
Write Command
AT+CSSN=<n>[, <m>]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
- + + + + - - 3GPP TS 27.007 [35]
<n>
(num)
<m>
(num)
<code 1>
(num)
Confidential / Released

Gemalto CINTERION BGS2T Specifications

General

Brand	Gemalto
Model	CINTERION BGS2T
Category	Touch terminals
Language	English