BGS2T AT Command Set
9.12 AT+CPUC
BGS2T_ATC_V01.301 Page 234 of 554 1/31/12
c
Example
To
change currency and/or price per unit you have two ways:
You can enter PIN2 along with the AT+CPUC command:
Alternatively, you can first use the AT+CPIN2 command to enter PIN2. When you execute the AT+CPUC com-
mand, subsequently, take into account that PIN2 authentication expires after 300s (see notes in AT+CPIN2).
AT+CPUC="EUR","0.10","8888"
(where "8888" = PIN2)
OK
AT+CPUC="EUR","0.10"
OK
Successful
AT+CPUC="EUR","0.10"
+CME ERROR: SIM PIN2 required
Attempt not successful. PIN2 authentication has
expired.
To Next Page
Loading...
