Gemalto CINTERION BGS2T - 15.24 AT^SSTR SAT Response - Refresh (1)

BGS2T AT Command Set
15.24 AT^SSTR
BGS2T_ATC_V01.301 Page 458 of 554 1/31/12
c
15.24 AT^SSTR SAT Response - Refresh (1)
The TE is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Com-
mand has been executed.
Syntax
Parameter Description
0...255
0 Command performed successfully
Optional additional command status; for possible values refer to 3GPP TS 11.14 [15].
0...255
Note
• The refresh action (SIM data cache update) will be performed in any case, i.e. <status> values other than
0 will be ignored.
Write Command
AT^SSTR=1, <status>, , [, <statAddInfo>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3  Last
- + + + + - -
<status>
(num)
<statAddInfo>
(num)
Confidential / Released