Gemalto CINTERION BGS2T - 7.21 AT+CLCC List of current calls

BGS2T AT Command Set
7.21 AT+CLCC
BGS2T_ATC_V01.301 Page 160 of 554 1/31/12
c
7.21 AT+CLCC List of current calls
The execute command lists all current calls. If the command is successful, but no calls are available, no infor-
mation response is sent to TE.
Syntax
Parameter Description
Call identification number as described in subclause 4.5.5.1 of 3GPP TS 22.030 [18]. This number can be used
in AT+CHLD command operations
0 Mobile originated call (MOC)
1 Mobile terminated call (MTC)
State of the call
0 Active
1Held
2 Dialing (MOC)
3 Alerting (MOC)
4 Incoming (MTC)
5 Waiting (MTC)
Bearer/teleservice
0Voice
1Data
2Fax
Test Command
AT+CLCC=?
Response(s)
OK
Exec Command
AT+CLCC
Response(s)
[+CLCC: <idx>, <dir>, <stat>, <mode>, <mpty>[, <number>, <type>[, <alpha>]]]
[+CLCC: <idx>, <dir>, <stat>, <mode>, <mpty>[, <number>, <type>[, <alpha>]]]
[+CLCC: ...]
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
+ + + + + - - 3GPP TS 27.007 [35]
<idx>
(num)
<dir>
(num)
<stat>
(num)
<mode>
(num)
Confidential / Released