Gemalto CINTERION BGS2T - 8.13 AT^SHOM Display Homezone

BGS2T AT Command Set
8.13 AT^SHOM
BGS2T_ATC_V01.301 Page 202 of 554 1/31/12
c
8.13 AT^SHOM Display Homezone
The AT^SHOM returns the homezone state. The result is valid only, if network registration state <regStatus> is
1 (registered) (see AT+CREG).
The feature is available only for supported network operators (Viag, One2One, Orange and LCI) and requires a
suitable SIM card. If the homezone feature is not supported by the network operator or SIM card, result is always
0.
Syntax
Parameter Description
0 ME is out of Homezone
1 ME is within the Homezone
Test Command
AT^SHOM=?
Response(s)
OK
Exec Command
AT^SHOM
Response(s)
^SHOM: <homezonestate>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last
+ + + + + - -
<homezonestate>
(num)
Confidential / Released