BGS2T AT Command Set
15.17 AT^SSTGI
BGS2T_ATC_V01.301 Page 446 of 554 1/31/12
c
15.17 AT^SSTGI SAT Get Information - Get Inkey (34)
This command shall be used after receiving the URC ^SSTN: 34.
The TE is asked to prompt the user for an input, which is a single character. Help can be requested by the user,
if available.
Syntax
Parameter Description
34 Proactive command ID, see Remote-SAT Command Types
0...255 Used as bit field
bit 1 0: Digits only (0 9, *, # and +)
1: Alphabet set
bit 2 0: SMS default alphabet (GSM character set)
1: UCS2 alphabet
bit 3 0: Character sets defined by bit 1 and bit 2 are enabled
1: Character sets defined by bit 1 and bit 2 are disabled and the "Yes/No"
response is requested
bit 4-7 RFU
bit 8 0: No help information available
1: Help information available
String as prompt for text.
0...255 Used as bit field
bit 1 0: Icon is self explanatory and replaces text
1: Icon is not self-explanatory and shall be displayed with the text Determined
value only if associated icon ID is not 0 (an icon exists).
bit 2-8 RFU
Write Command
AT^SSTGI=34
Response(s)
^SSTGI: <cmdType>, <commandDetails>, <text>, <iconQualifier>, <iconId>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last
- + + + + - -
<cmdType>
(num)
<commandDetails>
(num)
<text>
(str)
<iconQualifier>
(num)
To Next Page
Loading...
Need help?
General
