BGS2T AT Command Set
2.6 ATX
BGS2T_ATC_V01.301 Page 40 of 554 1/31/12
c
2.6 ATX CONNECT Result Code Format
ATX determines whether or not the BGS2T transmits particular result codes to the TE. It also controls whether
or not the ME verifies the presence of a dial tone when it begins dialing, and if engaged tone (busy signal) detec-
tion is enabled.
Syntax
Parameter Description
[0] CONNECT result code only returned. Dial tone and busy detection are dis-
abled.
1 CONNECT <text> result code only returned. Dial tone and busy detection are
both disabled.
2 CONNECT <text> result code returned. Dial tone detection is enabled, busy
detection is disabled.
3 CONNECT <text> result code returned. Dial tone detection is disabled, busy
detection is enabled.
4
(&F)
CONNECT <text> result code returned. Dial tone and busy detection are
both enabled.
Exec Command
ATX[<value>]
Response(s)
OK
ERROR
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
- + + + + - - V.250
<value>
(num)(&W)(&V)
To Next Page
Loading...
Need help?
General
