BGS2T AT Command Set
16.10 AT^SDLD
BGS2T_ATC_V01.301 Page 504 of 554 1/31/12
c
16.10 AT^SDLD Delete the 'last number redial' memory
AT^SDLD deletes all numbers stored in the "LD" memory.
Syntax
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 19.1, Restricted access to SIM data after SIM PIN authentication for further detail.
Test Command
AT^SDLD=?
Response(s)
OK
Exec Command
AT^SDLD
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last
+ + + + + - -
To Next Page
Loading...
Need help?
General
