EasyManuals Logo

Gemalto CINTERION BGS2T User Manual

Gemalto CINTERION BGS2T
554 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
BGS2T AT Command Set
3.4 AT+CEER
BGS2T_ATC_V01.301 Page 89 of 554 1/31/12
c
3.4.18 Proprietary release cause for Link Management
3.4.19 Proprietary release cause for PPP/IP-Stack
Number Description
1 ActionTempNotAllowed (Mobile temporary busy due to previous conflicting action)
2 Invalid bearer setting
3 Data service profile not valid or complete
4 GPRS Data service profile not valid or complete
5 CSD Data service profile not valid or complete
6 CSD Service not allowed due to MS Class setting CG
17 CSD Modem Instance in already in use (e.g. Data cable is connected when WAP CSD con-
nection shall be established)
18 CSD Modem is not responding
19 Modem returned ERROR
20 CSD Modem doesn't answered not within specified time
21 CSD Modem answered call request NO CARRIER (call estabishment failed)
22 CSD Modem answered call request with NO DIALTONE (no call possible at the moment e.g.
no network available)
23 CSD Modem answered call request with BUSY (called subscriber is busy)
24 CSD Modem call establishment timed out (e.g. called subscriber modem doesn't answer)
25 CSD Modem established call lost (e.g. called subscriber hang up, network lost)
Number Description
0 regular call deactivation
1 LCP stopped
255 undefined
Confidential / Released

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gemalto CINTERION BGS2T and is the answer not in the manual?

Gemalto CINTERION BGS2T Specifications

General IconGeneral
BrandGemalto
ModelCINTERION BGS2T
CategoryTouch terminals
LanguageEnglish

Related product manuals