Gemalto CINTERION BGS2T - 13.24 AT^SSMSS Set Short Message Storage Sequence

BGS2T AT Command Set
13.24 AT^SSMSS
BGS2T_ATC_V01.301 Page 405 of 554 1/31/12
c
13.24 AT^SSMSS Set Short Message Storage Sequence
The short message storage ''MT'' (see AT+CPMS) is a logical storage. It consists of two physical storages ''ME''
and ''SM''. This command allows to select the sequence of addressing this storage.
Syntax
Parameter Description
MT sequence
0
(&F)(P)
''MT'' storage is ''ME'' then ''SM
1 ''MT'' storage is ''SM'' then ''ME''
Note
• Access to the SIM storage is faster. For compatibility with previous software re-leases, the ''MT'' sequence
<seq>=0 is the factory default.
Test Command
AT^SSMSS=?
Response(s)
^SSMSS: (list of supported <seq>s)
Read Command
AT^SSMSS?
Response(s)
^SSMSS: <seq>
OK
Write Command
AT^SSMSS=<seq>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3  Last
- + + + + - -
<seq>
(num)
Confidential / Released