EasyManua.ls Logo

Gemalto CINTERION BGS2T - 13.3 AT+CMGD Delete short message

Gemalto CINTERION BGS2T
554 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BGS2T AT Command Set
13.3 AT+CMGD
BGS2T_ATC_V01.301 Page 374 of 554 1/31/12
c
13.3 AT+CMGD Delete short message
The write command deletes a short message from the preferred message storage <mem1> location <index>.
Syntax
Notes
If there is no short message stored at the selected index, the response is OK too.
Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 19.1, Restricted access to SIM data after SIM PIN authentication for further detail.
Test Command
AT+CMGD=?
Response(s)
OK
Write Command
AT+CMGD=<index>
Response(s)
OK
ERROR
+CMS ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
+ + + + + - - 3GPP TS 27.005 [34]
Confidential / Released

Table of Contents

Related product manuals