Gemalto CINTERION BGS2T - 16.9 AT+CNUM Read own numbers

BGS2T AT Command Set
16.9 AT+CNUM
BGS2T_ATC_V01.301 Page 503 of 554 1/31/12
c
16.9 AT+CNUM Read own numbers
AT+CNUM returns the subscribers own number(s) from the SIM.
Syntax
Parameter Description
Optional alphanumeric string associated with <number>.
Phone number in format specified by <type>.
Type of address octet, see also: AT+CPBR <type>.
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 19.1, Restricted access to SIM data after SIM PIN authentication for further
detail.
Test Command
AT+CNUM=?
Response(s)
OK
Exec Command
AT+CNUM
Response(s)
[+CNUM: [<alpha>], <number>, <type>]
[+CNUM: ... ]
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last Reference(s)
+ + + + + - - 3GPP TS 27.007 [35]
<alpha>
(str)
<number>
(str)
<type>
(str)
Confidential / Released