BGS2T AT Command Set
19.2 Star-Hash (*#) Network Commands
BGS2T_ATC_V01.301 Page 523 of 554 1/31/12
c
Table 19.3: Star-Hash Command Response Parameters
F
or exact specification of format and parameters for Star-Hash commands refer to Table 3.2 of 3GPP TS 22.004
[17], and Annex C of of 3GPP TS 22.030 [18].
Table 19.4: Star-Hash Commands for Supplementary Services
PW Password --
C Character of TE character set (e.g. asterisk, hash
or digit in case of USSD, or digits in case of held
calls or multiparty calls)
--
Parameter Meaning
<m> Mode: 0 = not active, 1 = active
<n> Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
<status> Status: 0 = not active, 1 = active
<class> Represents BS = basic service, refer to AT+CCFC, AT+CLCK
<fac> Facility lock, refer to AT+CLCK
<reason> Call forwarding reason
Star-Hash Code Abbreviations in Table 19.1 Functionality
* act Activate (except for CLIR, see list above)
** reg Register and activate
*# int Check status (interrogate)
# deact Deactivate (except for CLIR, see list above)
## eras Unregister and deactivate
Abbreviation Meaning Value
To Next Page
Loading...
Need help?
General
