Gemalto CINTERION BGS2T - 19.7 Summary of Unsolicited Result Codes (URC)

BGS2T AT Command Set
19.7 Summary of Unsolicited Result Codes (URC)
BGS2T_ATC_V01.301 Page 545 of 554 1/31/12
c
19.7 Summary of Unsolicited Result Codes (URC)
Table 19.10: Summary of Unsolicited Result Codes (URC)
AT Command URC
U
nsolicited Result Code Presentation
^SBC: Undervoltage
^SBC: Overvoltage
Co
nfiguration Commands
AT+CFUN ^SYSSTART
AT^SMSO ^SHUTDOWN
Sta
tus Control Commands
AT+CMER +CIEV: <indDescr>, <indValue>
1
[, <indValue>
2
]
AT^SIND +CIEV: <indDescr>[, <indValue>]
AT^SIND +CIEV: <indDescr>, <cmdType>, <commandDetails>[, <pathLen>, <fileNum>,
<fileList>]
AT^SIND +CIEV: <indDescr>, <indValue>, <vmCounter>
AT^SIND +CIEV: <indDescr>, <indValue>, <eonsOperator>, <servProvider>
AT^SIND +CIEV: <indDescr>, <nitzUT>, <nitzTZ>, <nitzDST>
C
all related Commands
AT^SLCC if the list of current calls is empty:
^SLCC:
if one or more calls are currently in the list:
^SLCC: <idx>, <dir>, <stat>, <mode>, <mpty>, <traffic channel
assigned>[, <number>, <type>[, <alpha>]]
[^SLCC: <idx>, <dir>, <stat>, <mode>, <mpty>, <traffic channel
assigned>[, <number>, <type>[, <alpha>]]]
[... ]
^SLCC:
AT+CRC RING
AT+CRC +CRING: <type>
Ne
twork Service Commands
AT+CREG +CREG: <regStatus>
AT+CREG +CREG: <regStatus>[, <netLac>, <netCellId>]
AT^SALS ^SALS: <line>
AT^SPCL ^SPCL: <status>
Su
pplementary Service Commands
AT^SACM +CCCM: <ccm>
AT+CCWA +CCWA: <calling number>, <type of number>, <class>, , <CLI validity>
AT+CCWA ^SCWA:
AT+CLIP +CLIP: <number>, <type>[, , [, [<alpha>][, <CLI validity>]]]
AT+CLIP +CLIP: <number>, <type>
Confidential / Released