BGS2T AT Command Set
7.22 AT^SLCC
BGS2T_ATC_V01.301 Page 164 of 554 1/31/12
c
6 Terminating: The call is not active anymore, but inband information is still avail-
able.
7 Dropped: The call has been suspended by the network, but may be resumed
later.
Bearer/teleservice
0Voice
1Data
2Fax
3 Voice followed by data, voice mode (only in connection with single numbering
scheme AT+CSNS)
4 Alternating voice/data, voice mode (only in connection with single numbering
scheme AT+CSNS)
5 Alternating voice/fax, voice mode (only in connection with single numbering
scheme AT+CSNS)
6 Voice followed by data, data mode (only in connection with single numbering
scheme AT+CSNS)
7 Alternating voice/data, data mode (only in connection with single numbering
scheme AT+CSNS)
8 Alternating voice/fax, fax mode (only in connection with single numbering
scheme AT+CSNS)
9 Unknown
0 Call is not one of multiparty (conference) call parties
1 Call is one of multiparty (conference) call parties
0 No traffic channel assigned. Transmission of DTMF tones not possible.
1 Traffic channel is assigned and the progress indicator IE has been received
(call setup) or a voice connection has an active state. The parameter indicates
that the audio path is activated. DTMF tones can be sent with AT+VTS.
Phone number in format specified by <type>
Type of address octet as defined by 3GPP TS 24.008 [32], subclause 10.5.4.7. For possible values see the
<type> parameters specified for phonebook related AT commands, for example AT+CPBR and AT+CPBW.
145 Dialing string <number> includes international access code character '+'
161 National number
128 Number is restricted
129 Otherwise
<mode>
(num)
<mpty>
(num)
<traffic channel assigned>
(num)
<number>
(str)
<type>
(num)
To Next Page
Loading...
