Gemalto CINTERION BGS2T - 15.25 AT^SSTR SAT Response - Set Up Event List (5)

BGS2T AT Command Set
15.25 AT^SSTR
BGS2T_ATC_V01.301 Page 459 of 554 1/31/12
c
15.25 AT^SSTR SAT Response - Set Up Event List (5)
The TE is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Com-
mand has been executed. The TE acknowledges that the event list has been set up correctly.
Syntax
Parameter Description
0...255
0 Command performed successfully
32 ME currently unable to process command
48 Command beyond ME's capabilities
132 ME currently unable to process command because screen is busy
Optional additional command status; for possible values refer to 3GPP TS 11.14 [15].
0...255
Write Command
AT^SSTR=5, <status>, , [, <statAddInfo>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3  Last
- + + + + - -
<status>
(num)
<statAddInfo>
(num)
Confidential / Released