Gemalto CINTERION BGS2T - 12.19 AT+FOPT Set bit Order independently

BGS2T AT Command Set
12.19 AT+FOPT
BGS2T_ATC_V01.301 Page 359 of 554 1/31/12
c
12.19 AT+FOPT Set bit Order independently
Model specific command to set bit order independently of the understanding which is "mirrored" and which is
direct.
Syntax
Parameter Description
0 Non-standard
1 Standard
Note
• Used for Fax Class 2 only.
Write Command
AT+FOPT=<opt>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3  Last
- + + - - - -
<opt>
(num)
Confidential / Released