Gemalto CINTERION BGS2T - 7.26 AT^SCNI List Call Number Information

BGS2T AT Command Set
7.26 AT^SCNI
BGS2T_ATC_V01.301 Page 171 of 554 1/31/12
c
7.26 AT^SCNI List Call Number Information
Syntax
Command Description
AT^SCNI returns a list of current calls of ME.
Parameter Description
Call identification number as described in subclause 4.5.5.1 of 3GPP TS 22.030 [18]. This number can be used
in AT+CHLD command operations
1...7
Call status of respective call number (first parameter)
0 Call hold
1 Call in progress
2 Waiting call
string type phone number in format specified by <type>
type of address octet in integer format; 145 when dialling string includes international access code character "+",
128 when number is restricted otherwise 129
Note
• See also 3GPP TS 27.007 [35]: AT+CLCC
Test Command
AT^SCNI=?
Response(s)
OK
Exec Command
AT^SCNI
Response(s)
^SCNI: <id>
1
[,<cs>[,<number>,<type>]]
^SCNI: <id>
2
[,<cs>[,<number>,<type>]]
[...]
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3  Last
+ + + + + - -
<id>
(num)
<cs>
(num)
<number>
(str)
<type>
(num)
Confidential / Released