BGS2T AT Command Set
12.3 AT+FBADMUL
BGS2T_ATC_V01.301 Page 343 of 554 1/31/12
c
12.3 AT+FBADMUL Error Threshold Multiplier
This command defines the "Copy-Quality-OK" multiplier. The number of lines received with a bad pixel count is
multiplied by this number. If the result exceeds the total number of lines on the page the error rate is considered
too high. A threshold multiplier value of 20 corresponds to a 5 per cent error rate. A value of 0 implies that error
checking is not present or disabled.
Syntax
Parameter Description
0...20
(P)
...255
Note
• Used for Fax Class 2 only.
Read Command
AT+FBADMUL?
Response(s)
<badmul>
OK
Write Command
AT+FBADMUL=<badmul>
Response(s)
OK
If error is related to ME functionality:
ERROR
PIN ASC0 MUX1 MUX2 MUX3 Last Reference(s)
- + + - - - - EIA PN-2388
<badmul>
(num)
To Next Page
Loading...
