Gemalto CINTERION BGS2T - 13.21 AT^SMGR Read short message without setting status to REC READ

BGS2T AT Command Set
13.21 AT^SMGR
BGS2T_ATC_V01.301 Page 402 of 554 1/31/12
c
13.21 AT^SMGR Read short message without setting status to REC
READ
The AT^SMGR command is a proprietary command which has the same syntax as AT+CMGR. The only functional
difference is that the status "REC UNREAD" of a short message is not overwritten to "REC READ".
Syntax
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 19.1, Restricted access to SIM data after SIM PIN authentication for further detail.
Test Command
AT^SMGR=?
Response(s)
^SMGR:
OK
Write Command
AT^SMGR=<index>
Response(s)
see AT+CMGR
PIN ASC0 MUX1 MUX2 MUX3  Last
+ + + + + - -
Confidential / Released