BGS2T AT Command Set
9.5 AT+CCUG
BGS2T_ATC_V01.301 Page 217 of 554 1/31/12
c
1 Suppress outgoing access
2 Suppress preferential CUG
3 Suppress preferential CUG and Outgoing Access.
Notes
• The active settings for omitted parameters are retained without changes.
• Explicit CUG invocation means that at each call setup, CUG information is added to the called number.
• Upon delivery, settings are predefined with
<n>=0,
<index>=10,
<info>=0.
These delivery defaults cannot be recalled automatically.
• When starting a call with ATD, Parameter 'G' or 'g' of command ATD will have no effect if the option selected
for this single call is identical to the option already selected with AT+CCUG.
• Current settings are saved in the ME automatically.
• ATZ or AT&F do not influence the current settings.
• Some combinations of parameters may lead to rejection of CUG calls by the network. For more information,
please consult 3GPP TS 24.085.
To Next Page
Loading...
Need help?
General
