BGS2T AT Command Set
16.2 AT+CPBR
BGS2T_ATC_V01.301 Page 488 of 554 1/31/12
c
Example
AT+CPBR=?
First run the AT+CPBR test command to find out the
maximum range of entries stored in the active
phonebook.
+CPBR:(1-100),20,17
BGS2T returns the supported values, where 100 is
the supported range of location numbers, 20 is the
length of the phone number and 17 is the maximum
length of the associated text.
AT+CPBR =1,3
Then use the AT+CPBR write command to display
the phonebook entries sorted by location numbers.
+CPBR:1,"+999999",145,"Charlie"
+CPBR:2,"+777777",145,"Bill"
+CPBR:3,"+888888",145,"Arthur"
To Next Page
Loading...
