BGS2T AT Command Set
10.13 Examples of how to Configure and Use Internet Service Profiles
BGS2T_ATC_V01.301 Page 290 of 554 1/31/12
c
OK
at^siss=1,user,"subscriber1"
Specify recipient's mailbox name.
OK
at^siss=1,passwd,"subscr1"
Password used by recipient for authentication to
POP3 server.
OK
at^siss=1,pCmd,"3"
Command used to retrieve emails.
OK
at^siss=1,pNumber,"2"
Email message number 2 shall be retrieved.
OK
at^siss?
To check the profile enter the AT^SISS read com-
mand. The response includes the values of all 10
connection profiles. Service profile 1 contains the
values specified above and the values automatically
assumed by default.
^SISS: 0,"srvType",""
^SISS: 1,"srvType","Pop3"
^SISS: 1,"conId","1"
^SISS: 1,"alphabet","0"
Default: Character set enabled with AT+CSCS shall
be used.
^SISS: 1,"address","192.168.1.2"
^SISS: 1,"user","subscriber1"
^SISS: 1,"passwd","*******"
^SISS: 1,"pCmd","3"
^SISS: 1,"tcPort","110"
Default: TCP port number commonly used for POP3.
^SISS: 1,"pNumber","2"
^SISS: 1,"pLength","0"
Default: Message size shall not be limited.
^SISS: 1,"pDelFlag","0"
Default: Retrieved message shall not be deleted on
POP3 server.
^SISS: 1,"tcpMR","10"
Default: Number of retransmission attempts for TCP
packets is 10 (= default of AT^SCFG).
^SISS: 1,"tcpOT","6000"
Default: Timeout before closing outstanding TCP
connection is 6000 sec (= default of AT^SCFG).
^SISS: 2,"srvType",""
^SISS: 3,"srvType",""
^SISS: 4,"srvType",""
^SISS: 6,"srvType",""
^SISS: 7,"srvType",""
^SISS: 8,"srvType",""
^SISS: 9,"srvType",""
OK
To Next Page
Loading...
