BGS2T AT Command Set
15.9 AT^SSTGI
BGS2T_ATC_V01.301 Page 435 of 554 1/31/12
c
5 Set up call, disconnecting all other calls (if any), with redial
6...255 Reserved Values
String for user confirmation stage
String containing called number
String for call set up stage
0...255 Used as bit field
bit 1 0: Icon is self explanatory and replaces text
1: Icon is not self-explanatory and shall be displayed with the text Determined
value only if associated icon ID is not 0 (an icon exists).
bit 2-8 RFU
0...255
0No Icon
0...255 Used as bit field
bit 1 0: Icon is self explanatory and replaces text
1: Icon is not self-explanatory and shall be displayed with the text Determined
value only if associated icon ID is not 0 (an icon exists).
bit 2-8 RFU
0...255
0No Icon
Note
• If the Fixed Dialling Number service is enabled, the number included in the SET UP CALL proactive command
shall not be checked against those of the FDN list.
<confirmationText>
(str)
<calledNumber>
(num)
<callSetupText>
(str)
<confirmationIconQualifier>
(num)
<confirmationIconId>
(num)
<callSetupIconQualifier>
(num)
<callSetupIconId>
(num)
To Next Page
Loading...
Need help?
General
