BGS2T AT Command Set
17.2 AT+CALA
BGS2T_ATC_V01.301 Page 508 of 554 1/31/12
c
Examples
EXAMPLE 1
You may want to configure a reminder message for July 31, 2005, at 9.30h, including the message "Good
Morning".
Do not switch off the GSM engine.When the alarm occurs the ME returns the following URC:
EXAMPLE 2
To set a fresh alarm using the same message as in Example 1, simply enter date, time and alarm index.
<type>, <text>, <tlength> can be omitted:
When the alarm is executed the URC comes with the same message:
EXAMPLE 3
To enable the ME to wake up into Alarm mode, e.g. on July 20, 2005, at 8.30h, enter
Next, power down the ME:
When the alarm is executed the ME wakes up to Alarm mode and displays a URC. If available, this line is
followed by the individual <text> most recently saved. If no individual message was saved only the first line
appears.
AT+CALA="05/07/31,09:30:00",0,0,"Good Morning"
OK
+CALA: Good Morning
AT+CALA="05/07/31,08:50:00",0
OK
+CALA: Good Morning
AT+CALA="05/07/20,08:30:00",0
OK
AT^SMSO
^SMSO: MS OFF
OK
^SHUTDOWN
^SYSSTART ALARM MODE
+CALA: Good Morning
To Next Page
Loading...
