EasyManuals Logo

Huawei Quidway S3500 Series User Manual

Huawei Quidway S3500 Series
671 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #226 background imageLoading...
Page #226 background image
Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches Chapter 5 BGP Configuration
Huawei Technologies Proprietary
5-8
Operation Command
Configure to permit connections
with EBGP peers (groups) on
directly connected network only.
undo peer { peer-address | group-name }
ebgp-max-hop [ ttl ]
By default, only the connections with EBGP peers (groups) on directly connected
networks are permitted. ttl refers to time-to-live in the range of 1 to 255 with the default
value as 64.
II. Configuring a peer (group) to be a client of a route reflector
Generally, this command is not configured for peer groups because IBGP neighbors
are in the default group. Instead the peer peer-address reflect-client command, which
is used to configure the peer address, can be set as the clients of a route reflector.
Table 5-9 Configuring a peer (group) to be a client of a route reflector
Operation Command
Configure a peer (group) to be a client of a
route reflector
peer { peer-address |
group-name } reflect-client
Cancel the configuration of making the peer
(group) as the client of the BGP route reflector
undo peer { peer-address |
group-name } reflect-client
For detailed information on route reflector, refer to “Configuring Route Reflector”
section of this manual.
III. Configuring to send default route to a peer (group)
Table 5-10 Configuring to send default route to a peer (group)
Operation Command
Configure to send default route to a
peer (group)
peer { peer-address | group-name }
default-route-advertise
Configure not to send default route to a
peer (group)
undo peer { peer-address | group-name }
default-route-advertise
By default, local router does not send default route to any peer (group).The local router
will send a default route with the next hop as itself to the peer unconditionally, even if
there is no default route in BGP routing table.
IV. Configuring itself as the next hop in advertising route
A BGP router can specify itself as the next hop while advertising route to a peer (group).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3500 Series and is the answer not in the manual?

Huawei Quidway S3500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3500 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals