Huawei Quidway S3500 Series - Page 408

Operation Manual - Integrated Management
Quidway S3500 Series Ethernet Switches Chapter 1 Stack Function Configuration
Huawei Technologies Proprietary
1-4
II. Networking diagram
Internet
Switch A
Switch B
Switch C
Internet
Switch A
Switch B
Switch C
Figure 1-1 Stack configuration example
III. Configuration procedure
# Configure IP address pool for the stack on Switch A.
[Quidway] stacking ip-pool 129.10.1.1 5
# Enable a stack on Switch A.
[Quidway] stacking enable
# Display stack information on the main switch, Switch A.
<stack_0.Quidway> display stacking
Main device for stack.
Total members:3
# Display stack member information on the main switch, Switch A.
<stack_0.Quidway> display stacking members
Member number: 0
Name:stack_0.Quidway
Device: Switch A
MAC Address:00e0-fc07-0bc0
Member status:Cmdr
Member number: 1
Name:stack_1.Quidway
Device: Switch B
MAC Address:00e0-fc07-58a0
Member status:Up
Member number: 2
Name:stack_2.Quidway
Device: Switch C
MAC Address:00e0-fc07-58a1