Huawei Quidway S3500 Series - Page 409

Operation Manual - Integrated Management
Quidway S3500 Series Ethernet Switches Chapter 1 Stack Function Configuration
Huawei Technologies Proprietary
1-5
Member status:Up
# Switch to the slave switch, Switch B, to perform the configuration.
<stack_0.Quidway> stacking 1
<stack_1.Quidway>
# Display stack information on the slave switch, Switch B.
<stack_1.Quidway> display stacking
Slave device for stack.
Member number: 1
Main switch mac address:00e0-fc07-0bc0
# Switch back to the main switch, Switch A to perform the configuration.
<stack_1.Quidway> quit
<stack_0.Quidway>
# Switch to the slave switch, Switch C, to perform the configuration.
<stack_0.Quidway> stacking 2
<stack_2.Quidway>
# Switch back to the main switch, Switch A to perform the configuration.
<stack_2.Quidway> quit
<stack_0.Quidway>