Huawei Quidway S3500 Series User Manual

Operation Manual - System Management
Quidway S3500 Series Ethernet Switches Chapter 4 System Maintenance and Debugging
Huawei Technologies Proprietary
4-10
Table 4-14 Sending the configuration information to the console terminal.
Device Configuration Default value Configuration description
Enable info-center
By default,
info-center is
enabled.
Other configurations are
valid only if the info-center is
enabled.
Set the information
output direction to
Console
- -
Set information source -
You can define which
modules and information to
be sent out and the
time-stamp format of
information, and so on. You
must turn on the switch of the
corresponding module
before defining output
debugging information.
Switch
Enable terminal display
function
-
You can view debugging
information after enabling
terminal display function
3) Sending the configuration information to monitor terminal
Table 4-15 Sending the configuration information to monitor terminal
Device Configuration Default value Configuration description
Enable info-center
By default,
info-center is
enabled.
Other configurations are
valid only if the info-center is
enabled.
Set the information
output direction to
monitor
- -
Set information source -
You can define which
modules and information to
be sent out and the
time-stamp format of
information, and so on. You
must turn on the switch of the
corresponding module
before defining output
debugging information.
Switch
Enable the terminal
display function and
this function for the
corresponding
information
-
For Telnet terminal and
dumb terminal, to view the
information, you must enable
the current terminal display
function using the terminal
monitor command.

Huawei Quidway S3500 Series Specifications

General

Brand	Huawei
Model	Quidway S3500 Series
Category	Network Router
Language	English