Operation Manual - Auto Detecting
Quidway S3500 Series Ethernet Switches Chapter 2 Implementations of Auto Detect
Huawei Technologies Proprietary
2-8
# Configure an IP address for VLAN interface 2.
[Quidway A] interface vlan-interface 2
[Quidway A-vlan-interface2] ip address 192.168.2.1 24
# Create a detecting group numbered 10.
[Quidway A] detect-group 10
# Add an IP address in detecting group 10 to specify to detect the reachability to the
interface with an IP address of 10.1.1.4, with the interface whose IP address is
192.168.1.2 as the next hop, and set the detecting number to 1.
[Quidway A-detect-group-10] detect-list 1 ip address 10.1.1.4 nexthop
192.168.1.2
[Quidway A-detect-group-10] quit
# Specify to enable VLAN interface 2 when the result of the detecting group is
unreachable.
[Quidway A] interface vlan-interface 2
[Quidway A-vlan-interface2] standby detect-group 10
To Next Page
Loading...
