Huawei Quidway S3500 Series - Page 77

Operation Manual - VLAN
Quidway S3500 Series Ethernet Switches Chapter 2 Isolate-User-Vlan Configuration
Huawei Technologies Proprietary
2-4
Secondary VLANs, VLAN2 and VLAN3. VLAN3 includes Ethernet0/1 and VLAN2
includes Ethernet0/2. The VLAN6 carried by Switch C is the isolate-user-vlan including
the Uplink Ethernet1/1 and two Secondary VLAN, VLAN3 and VLAN4. VLAN3 includes
Ethernet0/3 and VLAN4 includes Ethernet0/4. Seen from the Switch A, either Switch B
or Switch C carries one VLAN, VLAN 5 and VLAN 6 respectively.
II. Networking diagram
Switch C
vlan 5
vlan 6
vlan 3
Switch A
E1/1
E0/3
E0/4
E1/1
Switch B
E0/1 E0/2
vlan 2
vlan 4
vlan 3
Figure 2-1 isolate-user-vlan configuration example
III. Configuration procedure
Hereafter only listed the configuration procedure of the Switch B and Switch C.
Configure Switch B:
# Configure isolate-user-vlan
[Quidway] vlan 5
[Quidway-vlan5] isolate-user-vlan enable
[Quidway-vlan5] port ethernet1/1
# Configure Secondary VLAN
[Quidway-vlan5] vlan 3
[Quidway-vlan3] port ethernet0/1
[Quidway-vlan3] vlan 2
[Quidway-vlan2] port ethernet0/2
# Configure the isolate-user-vlan to Map the Secondary VLAN
[Quidway-vlan2] quit