Juniper M Series User Manual

Table 26: M7i or M10i Router Chassis Component Alarm
Conditions (continued)
Alarm
SeverityRemedyAlarm Condition
Chassis
Component
YellowInsert missing power
supply.
A power supply was
removed.
Power supplies
RedReplace the failed power
supply.
A power supply failed.
RedInsert or replace the
secondary power supply.
For an M10i router, only one
power supply is operating.
YellowReformat the hard disk and
install a bootable image. If
this fails, replace the failed
Routing Engine.
Error in reading or writing
hard disk.
Routing Engine
YellowReformat the
CompactFlash card and
install bootable image. If
this fails, replace the failed
Routing Engine.
Error in reading or writing
CompactFlash card.
YellowInstall a bootable image on
the CompactFlash card. If
this fails, replace the failed
Routing Engine.
System booted from hard
disk. This alarm only applies,
if you have an optional flash
drive.
RedReplace the failed Routing
Engine.
Compact flash is missing in
boot list.
RedReplace the failed Routing
Engine.
Hard disk is missing in boot
list.
RedReplace the failed Routing
Engine.
Routing Engine failed to
boot.
Copyright © 2012, Juniper Networks, Inc.72
M Series and T Series Routers Monitoring and Troubleshooting Guide

Juniper M Series Specifications

General

Brand	Juniper
Model	M Series
Category	Network Router
Language	English