Table 35: TX Matrix and TX Matrix Plus Router Chassis Component Alarm
Conditions (continued)
Alarm
SeverityRemedyAlarm Condition
Chassis
Component
YellowReformat the hard disk
and install a bootable
image. If this fails,
replace the failed
Routing Engine.
Error in reading or writing hard
disk.
Routing Engine
YellowReformat the
CompactFlash card and
install a bootable
image. If this fails,
replace the failed
Routing Engine.
Error in reading or writing
CompactFlash card.
YellowInstall a bootable image
on the default master
Routing Engine. If this
fails, replace the failed
Routing Engine.
System booted from the
default backup Routing
Engine. If you manually
switched mastership, ignore
this alarm condition.
YellowInstall a bootable image
on the CompactFlash
card. If this fails, replace
the failed Routing
Engine.
System booted from the hard
disk.
RedReplace the failed
Routing Engine.
Compact flash is missing in
boot list.
RedReplace the failed
Routing Engine.
Hard disk is missing in boot
list.
RedReplace the failed
Routing Engine.
Routing Engine failed to boot.
YellowInsert a power supply
into an empty slot.
A power supply was removed
from the chassis.
Power supplies
RedReplace the failed
power supply.
A power supply has failed.
Copyright © 2012, Juniper Networks, Inc.110
M Series and T Series Routers Monitoring and Troubleshooting Guide